Influence of CBCT-derived panoramic curve variability in the measurements for dental implant planning.

OBJECTIVE: To investigate whether the curve markings performed prior to panoramic and cross-sectional reconstructions can influence the planning of oral implants. METHODS: Twenty oral radiologists landmarked the reference panoramic curves in 25 CBCT scans of the mandible. Bone height was measured on the resulting cross-sectional slices in the edentulous region of the lower first molar. The following data were recorded: (1) number of landmarks used to build each reference curve; (2) shape of the reference curve (inverted "U", inverted "V" or "horseshoe"); and (3) measurement in the first molar region. The data were assessed for variability based on the number of landmarks, the shape of the reference curve, and the measurements obtained. RESULTS: The number of landmarks used to guide the panoramic reconstruction varied among radiologists (p < 0.05), but most of them draw curves in inverted "U" shape (68-100%). The reproducibility of the measurements taken in the edentulous mandibular first molar region was excellent (84.7%). The number of landmarks and the shape of the curve did not have a significant influence on the reproducibility of the measurements (p > 0.05). CONCLUSION: Variations of the operator-dependent steps during the panoramic reconstructions occur but do not play a significant part changing the measurements taken for oral implant planning.

Panoramic Radiography vs. CBCT in the Evaluation of the Maxillary Third Molar Roots.

Background and Objectives: A comprehensive understanding of the position of third molar roots and adjacent structures, such as the maxillary sinus (MS), is essential for safe extractions. Diagnostic imaging plays a fundamental role in achieving accurate treatment planning. This study aimed to compare panoramic radiography (PR) and cone-beam computed tomography (CBCT) for the evaluation of maxillary third molar roots and their relationship with the MS. Materials and Methods: Two trained radiologists evaluated third molar images. The number of roots, morphology (fused/conical, divergent, dilacerated, or atypical), and their relationship with the MS in PR and CBCT were registered. Descriptive and inferential statistics were performed using the weighted Kappa test. Results: Regarding the number and morphology of the roots, Kappa values showed moderate (κ = 0.42) and fair agreement (κ = 0.38), respectively. Regarding the proximity with the MS, most of the roots showed close contact (30.6%), or 1/3 of root superimposition (35%), in PR evaluation, while in CBCT, the third molars were in contact with the MS floor (32%), and with alveolar domes (27.2%). Conclusions: PR is a moderately reliable image technique to identify the number of roots and root morphology of maxillary third molars. PR, however, does not provide any radiographic signs that clearly indicate the anatomical relationship between the maxillary third molar roots and the maxillary sinus detected in CBCT images.

Assessment of cone beam computed tomography for determining position and prognosis of interradicular mini-implants.

OBJECTIVE: To investigate the influence of dynamic visualization of cone beam computed tomography (CBCT) scans on orthodontist's assessment of positioning status and prognosis of interradicular mini-implants (MI). METHODS: Three MI positions were virtually simulated in thirty CBCT volumes: (1) MI 1 mm from the lamina dura (LD), (2) MI touching the LD and (3) MI overlapping the LD. Each position was exposed to orthodontists (n = 35) as panoramic reconstruction, sagittal reconstruction and a sequence of axial slices. Each orthodontist evaluated the MI position (relationship with the LD) and scored the prognosis using a four-point scale (the higher the score, the better the prognosis). Kappa, Friedman and Nemenyi statistics were used. RESULTS: Statistically significant associations were detected between the prognosis scores and the type of image visualized (p<0.05). The dynamic visualization of the CBCT volume (axial slices) was associated with higher scores for prognosis and more reliable evaluation of MI positioning. Inconsistent outcomes were more frequently associated with panoramic and sagittal reconstructions. CONCLUSION: The dynamic visualization of axial slices allowed orthodontists to perform better assessment of MI position and considerably affected prognosis judgment.

CBCT study on the prevalence, morphology and position of the mandibular incisive canal in a North-Brazilian population.

Background: The mandibular incisive canal (MIC) is an anatomic structure to be considered in treatment planning for surgeries in the anterior region of the mandible. Awareness of the MIC increased with the use of 3D imaging for treatment planning, such as cone beam computed tomography (CBCT). This study aimed to use CBCT to assess the prevalence, morphology and position of the MIC among North-Brazilians. Material and Methods: The sample consisted of CBCT scans of 100 hemi-mandibles (50 individuals) that were assessed for the absolute (n) and relative frequency of the MIC. The morphological component of this study was the diameter (mm) of the detected MIC in five anatomic sites between the mental foramen and the midline. Within the interformainal region, the position of the MIC was assessed by measuring (mm) the distances between the MIC and the basal, vestibular and lingual cortical bone surfaces. Results: The prevalence of the MIC was >76% considering the different anatomic regions screened in CBCT. The mean diameter of the MIC progressively reduced from 1.29 mm to 0.86 throughout the five anatomic regions measured. The position of the MIC showed a downward trajectory away from the lingual cortical bone surface. Conclusions: MIC was a highly prevalent anatomic structure in the studied sample. The funnel-shaped outline of the MIC and its trajectory into the interforaminal region highlighted a major risk of damage to the neurovascular bundle in surgeries (e.g. implant placement) that are close to the mental foramen and the vestibular cortical bone. Key words:Anatomy, cone beam computed tomography, imaging, mandibular incisive canal, oral radiology.

Evaluation of the dosimetry and centralization of scout-view function in CBCT.

This study evaluated the centralization of the region of interest (ROI) in acquisition of the CBCT images, when the freely positionable scout-view (SV) function is applied. Additionally, the dosimetry of the acquired images was assessed in the SV function alone as well as in complete tomographic image in two different fields of view (FOV) (50x50 and 78x150mm). A three-location device was created to accommodate the dosimeters and the specimens, in the right, middle and left location during image acquisition. For dose assessment, thermoluminescent dosimeters were irradiated within the FOV and analyzed in a portable reader. For ROI evaluation, three specimens of gutta-percha stick were placed on the same device and the CT scans were acquired (CBCT OP 300 Maxio device, 90kV, 13mA, 85 µm voxel size, FOV of 50X50mm), with and without the SV, in three positions (3-9, 1-7 and 5-11 o'clock), simulating different regions of the mouth. Two image evaluations were performed, an objective and subjective. There was a slight percentage increase (1.36% to 1.40%) of the radiation dose with the use of SV. The distances were significantly greater in the images acquired without SV (p < 0.05). Every image obtained with SV was classified as being at the FOV's center. In conclusion, the results demonstrated that SVs function is effective to centralize the ROI in the FOV, increasing the scan precision and avoiding repetitions due to positioning errors.

Evaluation of the dosimetry and centralization of scout-view function in CBCT

Abstract This study evaluated the centralization of the region of interest (ROI) in acquisition of the CBCT images, when the freely positionable scout-view (SV) function is applied. Additionally, the dosimetry of the acquired images was assessed in the SV function alone as well as in complete tomographic image in two different fields of view (FOV) (50x50 and 78x150mm). A three-location device was created to accommodate the dosimeters and the specimens, in the right, middle and left location during image acquisition. For dose assessment, thermoluminescent dosimeters were irradiated within the FOV and analyzed in a portable reader. For ROI evaluation, three specimens of gutta-percha stick were placed on the same device and the CT scans were acquired (CBCT OP 300 Maxio device, 90kV, 13mA, 85 µm voxel size, FOV of 50X50mm), with and without the SV, in three positions (3-9, 1-7 and 5-11 o'clock), simulating different regions of the mouth. Two image evaluations were performed, an objective and subjective. There was a slight percentage increase (1.36% to 1.40%) of the radiation dose with the use of SV. The distances were significantly greater in the images acquired without SV (p < 0.05). Every image obtained with SV was classified as being at the FOV's center. In conclusion, the results demonstrated that SVs function is effective to centralize the ROI in the FOV, increasing the scan precision and avoiding repetitions due to positioning errors.

Resumo Este estudo avaliou a centralização da região de interesse (ROI) na aquisição das imagens de TCFC, quando a função scout-view (SV) posicionável livremente é aplicada. Adicionalmente, a dosimetria das imagens adquiridas foi avaliada isoladamente na presença da função SV, bem como após aquisição de imagem tomográfica completa em dois diferentes campos de visão (FOV) (50x50 e 78x150mm). Um dispositivo de três localizações foi criado para acomodar os dosímetros e os espécimes, na localização direita, central e esquerda, durante a aquisição das imagens. Para avaliação da dose, dosímetros termoluminescentes foram irradiados dentro dos campos de visão e analisados em leitor portátil. Para avaliação da ROI, três espécimes de guta percha foram colocados no mesmo aparelho e as tomografias foram adquiridas (CBCT OP 300 Maxio, 90kV, 13mA, 85 μm tamanho de voxel, FOV de 50X50mm), com e sem a SV, em três posições (3-9, 1-7 e 5-11 horas), simulando diferentes regiões da boca. Foram realizadas duas avaliações de imagem, uma objetiva e outra subjetiva. Houve um leve aumento percentual (1,36% para 1,40%) da dose de radiação com o uso de SV. As distâncias foram significativamente maiores nas imagens adquiridas sem SV (p < 0,05). Todas as imagens obtidas com SV foram classificadas como sendo do centro do FOV. Em conclusão, os resultados do presente estudo demonstraram que a função scout view é eficaz para centralizar a ROI no FOV, aumentando a precisão do escaneamento e evitando repetições devido a erros de posicionamento.

Diagnostic accuracy of the third molar maturity index (I3M) to assess the age of legal majority in Northern Brazil-population-specific cut-off values.

International guidelines for dental age assessment have recommended the use of methods based on available population-specific data. The Third Molar Maturity Index (I3M) was previously validated in several populations worldwide. This was the first study to evaluate the I3M in a northern Brazilian population and to test the diagnostic accuracy of the method to distinguish between minors and adults. The sample consisted of 1.070 panoramic radiographs retrospectively collected from females (n = 595) and males (n = 475) with ages between 16 and 22 years. I3M's original cut-off value of 0.08 was used to classify individuals below and above the age of 18. Receiver operating characteristic (ROC) curves were plotted to assess the accuracy (ACC) of the method. In females and males separately, the overall ACC was 73.1% and 80%, respectively. The overall ACC for the combined sample was 76.1%. For northern Brazilian males, the best cut-off value remained 0.08, while for females, an adjustment to 0.12 showed optimal outcomes. The new cut-off value led to an ACC of 98.5% for females, which reflected an increase of 25.5% compared to the original cut-off value. The original cut-off value proposed by I3M was applicable to the present sample of northern Brazilian individuals. Adjustments to 0.12, however, may be encouraged to enhance the performance of the method among females.

Digital anatomy table in teaching-learning process of the temporomandibular joint anatomy.

INTRODUCTION: The use of teaching resources and digital objects has gradually been incorporated into dental schools. This study aimed to evaluate the digital anatomy table in teaching-learning process of the temporomandibular joint (TMJ) anatomy and the student's perception regarding this resource. MATERIALS AND METHODS: A cross-sectional study was conducted on 41 undergraduate dental students. Knowledge assessment tests were applied at different time intervals: before and after the TMJ theoretical class, after the practical class on prosected specimens and after the use of digital anatomy table. The medians of the scores obtained in the three groups (theoretical class, practical class and digital table) were descriptively analysed and submitted to Wilcoxon, Kruskal-Wallis and Student-Newman-Keuls statistical tests. The perception survey was conducted at the end of the study. RESULTS: When the teaching strategies were compared amongst each other, the medians of the scores with the digital anatomy table were significantly higher than after the theoretical and practical classes. At the end of the research, there were no differences amongst the three groups (theoretical class, practical class and digital table). Regarding the perception, the majority of the students reported that the digital anatomy table helped them to understand the content of the theoretical class. CONCLUSION: It was concluded that learning with the use of the digital anatomy table did not increase the knowledge of dental students with respect to the TMJ anatomy. The students' perceptions of the digital anatomy table were positive and that it could be used as an additional resource in the teaching-learning process.

Comparison of CBCT and panoramic radiography for the assessment of bone loss and root resorption on the second molar associated with third molar impaction: a systematic review.

OBJECTIVE: To investigate whether the use of cone beam CT (CBCT) changes the diagnosis of external root resorption (ERR) or marginal bone loss (MBL) involving a second molar adjacent to an impacted third molar. METHODS: A systematic search was applied in PubMed, EMBASE, Scopus, Web of Science, LILACS, Google Scholar, OpenGrey, and ProQuest. Studies assessing the detection of ERR or MBL in a second molar adjacent to an impacted third molar through CBCT and panoramic radiography (PAN) were included. Prevalence and agreement between PAN and CBCT on the detection of ERR and MBL were collected. The risk of bias was assessed using the MAStARI. RESULTS: A total of 593 papers were identified, and after a 2-phase selection, 5 studies were included in the narrative synthesis. Regarding ERR, its prevalence in PAN was reported from 5.31 to 19.5% and from 22.8 to 62.0% in CBCT. The percentage of agreement varied from 28.5 to 74.0%. The prevalence of MBL varied from 21.9 to 62.9% in PAN, while those values varied from 21.6 to 80% in CBCT images. The percentage of agreement between PAN and CBCT for the detection of MBL ranged from 66.0 to 85.0%. Four studies presented low risk of bias and one had moderate risk. CONCLUSIONS: More ERR and MBL are assessed in CBCT compared to PAN. There is a considerable agreement between PAN and CBCT assessment of ERR and MBL, however, mostly related to the absence of the pathology rather its presence.

Assessment of cone beam computed tomography for determining position and prognosis of interradicular mini-implants

ABSTRACT Objective: To investigate the influence of dynamic visualization of cone beam computed tomography (CBCT) scans on orthodontist's assessment of positioning status and prognosis of interradicular mini-implants (MI). Methods: Three MI positions were virtually simulated in thirty CBCT volumes: (1) MI 1 mm from the lamina dura (LD), (2) MI touching the LD and (3) MI overlapping the LD. Each position was exposed to orthodontists (n = 35) as panoramic reconstruction, sagittal reconstruction and a sequence of axial slices. Each orthodontist evaluated the MI position (relationship with the LD) and scored the prognosis using a four-point scale (the higher the score, the better the prognosis). Kappa, Friedman and Nemenyi statistics were used. Results: Statistically significant associations were detected between the prognosis scores and the type of image visualized (p<0.05). The dynamic visualization of the CBCT volume (axial slices) was associated with higher scores for prognosis and more reliable evaluation of MI positioning. Inconsistent outcomes were more frequently associated with panoramic and sagittal reconstructions. Conclusion: The dynamic visualization of axial slices allowed orthodontists to perform better assessment of MI position and considerably affected prognosis judgment.

RESUMO Objetivo: Analisar se a avaliação dinâmica de volumes de tomografia computadorizada de feixe cônico (TCFC) influencia a percepção de ortodontistas quanto à determinação da posição e do prognóstico de mini-implantes (MIs) inter-radiculares. Material e Métodos: Foram selecionados 30 volumes de TCFC, nos quais foram simuladas três formas de instalação de MIs: 1) MI a 1 mm de distância da lâmina dura (LD); 2) MI tocando a LD; e 3) MI sobreposto à LD. As imagens foram examinadas por 35 ortodontistas na forma de reconstruções panorâmicas, reconstruções sagitais e uma sequência de reconstruções axiais. Os examinadores avaliaram a relação entre o MI e a LD, e indicaram o prognóstico dos MIs instalados, usando uma escala de 4 pontos (quanto maior o escore, mais favorável o prognóstico). Os dados foram submetidos à análise estatística, por meio dos testes de Kappa, Friedman e Nemenyi. Resultados: Houve associação significativa entre o prognóstico, os tipos de imagem e as três formas de inserção dos MIs (p<0,05). A visualização dinâmica dos volumes de TCFC (reconstruções axiais) foi associada a maiores escores para o prognóstico e a avaliações mais confiáveis da posição dos MIs. Escores mais inconsistentes e discordantes foram mais associados às reconstruções panorâmicas e sagitais. Conclusão: A análise do volume tomográfico em reconstruções axiais pode melhorar a avaliação do ortodontista quanto à posição dos MIs inter-radiculares, apresentando impacto significativo na determinação do prognóstico do caso.

Radiobiological risks following dentomaxillofacial imaging: should we be concerned?

OBJECTIVES: This review aimed to present studies that prospectively investigated biological effects in patients following diagnostic dentomaxillofacial radiology (DMFR). METHODS: Literature was systematically searched to retrieve all studies assessing radiobiological effects of using X-ray imaging in the dentomaxillofacial area, with reference to radiobiological outcomes for other imaging modalities and fields. RESULTS: There is a lot of variability in the reported radiobiological assessment methods and radiation dose measures, making comparisons of radiobiological studies challenging. Most radiological DMFR studies are focusing on genotoxicity and cytotoxicity, data for 2D dentomaxillofacial radiographs, albeit with some methodological weakness biasing the results. For CBCT, available evidence is limited and few studies include comparative data on both adults and children. CONCLUSIONS: In the future, one will have to strive towards patient-specific measures by considering age, gender and other individual radiation sensitivity-related factors. Ultimately, future radioprotection strategies should build further on the concept of personalized medicine, with patient-specific optimization of the imaging protocol, based on radiobiological variables.

Influence of the exomass on the detection of simulated root fracture in cone-beam CT - an ex-vivo study.

OBJECTIVES: To evaluate the influence of exomass-related metal artefacts on the detection of simulated vertical root fracture (VRF) in cone-beam computed tomography (CBCT). METHODS: 20 teeth were endodontically instrumented and VRF was induced in half of them. All teeth were individually placed in an empty socket of a human mandible. Metallic materials were differently arranged in the exomass [zone outside of the field of view (FOV) but between the X-ray source and the receptor] and/or endomass (zone inside of the FOV), and CBCT scans were obtained. Four radiologists evaluated the presence of VRF using a 5-point scale. Sensitivity, specificity, and area under the receiver operating curve (AUC) were compared using ANOVA. Also, the tooth of interest was replaced with a tube filled with a radiopaque solution and all CBCT scans were repeated to analyse the data objectively. Mean grey and noise values were obtained from the tube and compared using ANOVA followed by Tukey's test (α = 0.05). RESULTS: Mean grey values were significantly lower and noise was significantly higher when metallic materials were present in the endomass or both the exomass and endomass. Sensitivity, specificity, and AUC were not influenced by the artefacts from the metallic materials irrespective of the arrangement condition. CONCLUSIONS: Exomass-related metal artefacts did not influence the diagnosis of simulated VRF in CBCT.

Development of a model of soft tissue simulation using ballistic gelatin for CBCT acquisitions related to dentomaxillofacial radiology research.

OBJECTIVES: To present the ballistic gelatin as a new material capable of simulating the soft tissues in cone-beam CT (CBCT) images. METHODS: CBCT images of three piglet heads were acquired with their soft tissues intact (standard group). Subsequently, the piglet heads were fixed in a container using metallic pins and moulded with acrylic resin; the soft tissues were then removed and replaced by ballistic gelatin, with the same thickness of the original soft tissues. The images were evaluated by two oral radiologists, to check the adaptation on bone surfaces, thickness and density, penetration into large bone cavities and cancellous bone, and the presence of air bubbles using a 5-score scale. Additionally, an objective analysis was carried out by one oral radiologist. For each CBCT scan, three axial reconstructions were selected to represent the mandibular, occlusal, and maxillary levels. The mean and standard deviation (SD) of the grey values were calculated in four regions of interest determined on soft tissue areas and compared by two-way ANOVA. RESULTS: The ballistic gelatin showed subjective scores ranging from good to excellent for all parameters evaluated. There was no significant difference in the mean and SD values of the grey values between ballistic gelatin and the gold standard groups for all levels (p > 0.05). Higher SD values were observed in the occlusal level for both groups (p < 0.05). CONCLUSIONS: Ballistic gelatin has visual and objective similarity with the gold standard. Thus, the ballistic gelatin is a promising material capable of simulating soft tissues in CBCT images.

Marginal bone loss in the second molar related to impacted mandibular third molars: comparison between panoramic images and cone beam computed tomography

BACKGROUND: Deciding whether or not to extract third molars remains a controversial situation in dental practice. Image exams support this decision by enabling a close view of the third molar, its adjacent bone and its relationship with the second molar. This study aimed to assess and compare second molar bone loss adjacent to impacted mandibular third molar in panoramic radiographs (PAN) and cone beam computed tomography (CBCT) scans. MATERIAL AND METHODS: A sample of 70 patients was selected (n=124 teeth). Each patient had a set of a panoramic radiograph and CBCT scans consecutively taken for dental treatment purposes. In PAN and CBCT, mandibular third molars were classified based on their position and bone loss of the adjacent second molar. Agreement between PAN and CBCT scans was assessed and quantified. RESULTS: Outcomes of bone loss assessment were different between PAN and CBCT scans (p < 0.05). Bone loss was found in 62.9% of the PAN, while in CBCT scans it was found in 80%. In particular, nearly 29% (n=27) of the teeth that were classified without bone loss in PAN were classified with bone loss in CBCT scans. Mesioangular and horizontal third molars had a statistically significant association with bone loss of the adjacent second molars (p < 0.05). In general, PAN underestimated the severity of bone loss compared to CBCT scans (p < 0.05). CONCLUSIONS: Diagnosing second molar bone loss due to impaction of adjacent third molar in PAN may be challenging because of false negatives. Impacted third molars justify preoperative CBCT scans if second molar bone loss needs to be precisely assessed for a more detailed and reliable treatment plan

No disponible

Analysis of the deterioration of photostimulable phosphor plates.

OBJECTIVES: To assess, objectively to determine the deterioration of the photostimulable phosphor plates (PSPs) after several acquisitions. METHODS: Two new PSPs without preliminary use were exposed with an intraoral X-ray unit, and the EXPRESS® (Instrumentarium Imaging, Tuusula, Finland) unit was used for scanning of the PSPs. A 12-stepwedge aluminum scale were used superimposed with the PSPs during the X-rays exposures to perform the objective analyses. Objective analysis was carried out by mean gray values using the Image J software through a region of interest (ROI) of 0.1 × 0.1 mm, and the data were analyzed statistically using ANOVA. RESULTS: For each, the Express® PSP a total of 1800 images were acquired during 60 days. The objective analysis showed loss of the mean gray values between the initial and final images. Besides, the percentage of mean gray values' loss was between 0.7%, for the thickest step, and 8.4%, for the lowest thickness step. CONCLUSION: After many X-ray exposures of the Express® PSP a singular deterioration in the mean gray values could be observed.

Análise ético-jurídica da publicidade odontológica no Instagram / Ethical and legal analysis of Odontology-related advertisement on Instagram

A restrição à publicidade odontológica coíbe a mercantilização, resguarda a privacidade do paciente e o protege como consumidor. O objetivo deste estudo foi avaliar a adequação da publicidade na rede Instagram® ao regramento vigente. Numa amostra de 384 perfis profissionais, avaliaram-se postagens públicas à luz da Lei 5.081/1966, Código de Defesa do Consumidor e Código de Ética Odontológica. A identificação adequada não foi feita por 35,4%. Já 3,6% anunciaram especialidades não reconhecidas. A expressão "popular" foi utilizada por 27,1%. Houve publicidade abusiva (16,4%) ou enganosa (8,3%). Serviços gratuitos foram anunciados (9,4%), com divulgação de preços (5,5%). Usando a imagem do paciente (79,4%), constatou-se divulgação de resultados clínicos (72,9%). Houve identificação do paciente em 68,2%, com uso adequado da imagem em apenas 9,1% dos casos. As imagens de antes/depois foram usadas em 76,6% das postagens. As inadequações sem a imagem do paciente orbitam entre infração ética, exercício profissional ilícito e desrespeito ao direito consumerista. Conclui-se que a publicidade odontológica veiculada no Instagram® apresentou condutas ilícitas e antiéticas, com e sem o uso da imagem do paciente o que pode configurar prejuízos ao paciente, ao profissional e à Odontologia como profissão da área de saúde.

Publisher Correction: Halve the dose while maintaining image quality in paediatric Cone Beam CT.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Validity of micro-CT for in vitro caries detection: a systematic review and meta-analysis.

OBJECTIVE: To investigate the validity of micro-CT for in vitro caries detection in comparison with histology as the reference standard. METHODS: A systematic search was conducted in the databases Latin American and Caribbean Health Sciences (LILACS), LIVIVO, PubMed, Scopus and Web of Science from their inception to 16 January 2019. Grey literature was searched on Open Grey, ProQuest Dissertations and Theses Database and Google Scholar. In vitro studies assessing the validity of micro-CT for caries detection were included when compared with histology as the reference standard were included. Two authors independently collected the information and sensitivity, specificity, positive and negative likelihood ratios, as well as diagnostic odds ratios were calculated. The risk of bias of the included studies was assessed using the QUADAS-2 tool. Certainty of evidence was assessed with GRADE. RESULTS: A total of 270 papers were identified, and after a 2-phase selection, 12 studies were included in qualitative and three in quantitative synthesis. For enamel caries diagnostic, sensitivity values ranged from 29.0 to 84.0% indicating high variability while specificity varied from 88.0 to 95.0% indicating good to excellent micro-CT capability do identify the true negative. For dentine caries diagnostic, sensitivity values ranged from 61.0 to 77.0% indicating fair-to-good probability of micro-CT to identify the true positives, while specificity varied from 88.0 to 94.0%. The majority of the included studies presented low risk of bias and moderate certainty of evidence. CONCLUSIONS: This study demonstrated the validity of micro-CT for in vitro caries detection in comparison with histology.

Halve the dose while maintaining image quality in paediatric Cone Beam CT.

Cone beam CT (CBCT) for dentomaxillofacial paediatric assessment has been widely used despite the uncertainties of the risks of the low-dose radiation exposures. The aim of this work was to investigate the clinical performance of different CBCT acquisition protocols towards the optimization of paediatric exposures. Custom-made anthropomorphic phantoms were scanned using a CBCT unit in six protocols. CT slices were blinded, randomized and presented to three observers, who scored the image quality using a 4-point scale along with their level of confidence. Sharpness level was also measured using a test object containing an air/PMMA e,dge. The effective dose was calculated by means of a customized Monte Carlo (MC) framework using previously validated paediatric voxels models. The results have shown that the protocols set with smaller voxel size (180 µm), even when decreasing exposure parameters (kVp and mAs), showed high image quality scores and increased sharpness. The MC analysis showed a gradual decrease in effective dose when exposures parameters were reduced, with an emphasis on an average reduction of 45% for the protocol that combined 70 kVp, 16 mAs and 180 µm voxel size. In contrast, both "ultra-low dose" protocols that combined a larger voxel size (400 µm) with lower mAs (7.4 mAs) demonstrated the lowest scores with high levels of confidence unsuitable for an anatomical approach. In conclusion, a significant decrease in the effective dose can be achieved while maintaining the image quality required for paediatric CBCT.